Diagnostic Fault Information

WARNING: This page is about a different variant/trim than selected.

NOTE:

DTC P0741, P2817 will set with a hydraulic/mechanical condition or high resistance in the circuit of the component Q77H without setting component/control circuit DTCs.
DTC P2818 will set with a hydraulic/mechanical condition.
The components are listed from the least to the most intrusive to service.

Component	DTC	Condition
Q77H Transmission Control Solenoid Valve 8	P0741, P2817, P2818	Solenoid Valve - Binding or Sticking/Stuck/Visible Damage Retaining Clip@Solenoid Valve - Missing/Visible Damage
Torque Converter Clutch Regulator Apply Valve Valve Spring Valve Body Bore	P0741, P2817, P2818	Valve - Binding or Sticking/Debris/Scored/Visible Damage Valve Body Bore - Scored/Visible Damage Spring@Valve - Visible Damage
Torque Converter Clutch Blowoff Ball Valve Torque Converter Clutch Blowoff Ball Valve Spring Torque Converter Clutch Blowoff Ball Valve Retainer	P0741, P2817, P2818	Binding or Sticking Debris on the component. Mechanically damaged
Torque Converter Clutch - Anti Drainback Valve	P0741, P2817, P2818	Binding or Sticking Debris on the component. Mechanically damaged
Control Valve Body	P0741, P2817	Fluid/oil passage - Restricted/Leaking
Torque Converter	P0741, P2817, P2818	Binding or Sticking Debris on the component. Mechanically damaged