Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0721
Output Speed Sensor Direction Signal = Not Plausible - For greater than 3.5 s
P0722
Transmission OSS = Less than 31 RPM - For greater than 4 s
P0723
Transmission OSS = Decreases greater than 649 RPM - For greater than 7.5 s
P077C
Signal circuit = Less than 0.25 V - For greater than 1 s
P077D
Signal circuit = Greater than 4.75 V - For greater than 1 s
P172A
Current Gear = Forward Gear & Output Shaft Speed Sensor Direction Forward - For greater than 2.5 s
P172B
Current Gear = Reverse Gear & Output Shaft Speed Sensor Direction Reverse - For greater than 2.5 s