Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P2227Condition 1
BARO & Calculated BARO = Not within 15 kPa (2.2 PSI) of each other.
Condition 2
BARO & Calculated BARO = Not within 20 kPa (3.0 PSI) of each other.
P2228
BARO = Less than 2 V - For greater than 5 s
P2229
BARO = Greater than 4.5 V - For greater than 5 s
P2230
BARO = Signal noisy or erratic - For greater than 5 s