LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Engine Controls And Fuel - 2.0L - Diagnostic Information And Procedures (2 Of 3)) >> Diagnostic Information and Procedures >> DTC P0340, P0341, P0365, or P0366 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0340, P0365Condition 1 

Camshaft Position Sensor = No Signal - For Greater than 5.5 s

Condition 2 

Camshaft Position Sensor = No Signal - For Greater than 4 s - Starter is engaged.

Condition 3 

Camshaft Position Sensor = Less than 4 pulse(s) - For Greater than 3 s

Condition 4 

Camshaft Position Sensor = No Signal - During the first 2 engine revolutions.

Condition 5 

Camshaft Position Sensor = No Signal - During 200 engine revolution(s)

P0341, P0366Condition 1 

Camshaft Position Sensor = Less than 4 pulse(s) - During 2 engine revolution(s)

Condition 2 

Camshaft Position Sensor = Greater than 6 pulses - During 2 engine revolution(s)

Condition 3 

Camshaft Position Sensor = Less than 398 pulse(s) - Greater than 402 pulses - During 200 engine revolution(s)

scientia non olet · About LEMON Manuals