Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0324Condition 1
- Engine = Running - For Greater than 2 s
- Engine Coolant Temperature = Greater than -40°C (-40°F)
- Engine Speed = 400 to 8, 500 RPM
- Mass Air Flow Per Cylinder = 400 to 2, 000 mg
Condition 2
- Engine = Running - For Greater than 2 s
- Intake Air Temperature = Greater than -40°C (-40°F)
- Engine Speed = Greater than 400 RPM - Cumulative = For Greater than 500 engine revolutions
- Mass Air Flow Per Cylinder = 400 to 2, 000 mg
Frequency the DTC runs = Continuously - After the running conditions are met
P0325, P0330Condition 1
- Engine = Running - For Greater than 2 s
- Engine Speed = 400 to 8, 500 RPM - For Greater than 125 engine revolutions
- Mass Air Flow Per Cylinder = 200 to 2, 000 mg
- Engine Coolant Temperature = Greater than -40°C (-40°F)
Condition 2
- Engine = Running - For Greater than 2 s
- Engine Speed = 400 to 8, 500 RPM - For Greater than 125 engine revolutions
- Mass Air Flow Per Cylinder = 200 to 2, 000 mg
- Intake Air Temperature = Greater than -40°C (-40°F)
Frequency the DTC runs = Continuously - After the running conditions are met
P0326, P0331Condition 1
- Engine = Running - For Greater than 2 s
- Engine Coolant Temperature = Greater than -40°C (-40°F)
- Intake Air Temperature = Greater than -40°C (-40°F)
- Engine Speed = Greater than 2, 250 RPM
- Mass Air Flow Per Cylinder = 30 to 2, 000 mg
Condition 2
- Engine = Running - For Greater than 2 s
- Intake Air Temperature = Greater than -40°C (-40°F)
- Engine Speed = Greater than 2, 250 RPM
- Mass Air Flow Per Cylinder = Greater than 2, 000 mg
- Engine Speed = Greater than 2, 250 RPM - Cumulative = For Greater than 125 engine revolutions
Frequency the DTC runs = Continuously - After the running conditions are met
P0327, P0328, P0332, P0333
Engine Speed = Less than 8, 500 RPM
Frequency the DTC runs = Continuously - After the running conditions are met
P06B6, P06B7
- Engine = Running - For Greater than 2 s
- Engine Speed = 400 to 8, 500 RPM - For Greater than 250 engine revolutions
- Mass Air Flow Per Cylinder = 20 to 2, 000 mg
Frequency the DTC runs = Continuously - After the running conditions are met