Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0340, P0345, P0365, P0390 Condition 1

Camshaft Position Sensor = No Signal - For greater than 5.5 s

Condition 2

Camshaft Position Sensor = No Signal - For greater than 4 s - Starter is engaged.

Condition 3

Camshaft Position Sensor = Less than 4 pulse(s) - For greater than 3 s

Condition 4

Camshaft Position Sensor = No Signal - During the first 1 engine revolutions.

Condition 5

Camshaft Position Sensor = No Signal - During 100 engine revolution(s)

P0341, P0346, P0366, P0391 Condition 1

Camshaft Position Sensor = Less than 4 pulse(s) - During 2 engine revolution(s)

Condition 2

Camshaft Position Sensor = Greater than 6 pulses - During 2 engine revolution(s)

Condition 3

Camshaft Position Sensor = Less than 398 pulse(s) - Greater than 402 pulses - During 100 engine revolution(s)