LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Engine Controls And Fuel - 3.6L - Diagnostic Information And Procedures (1 Of 2)) >> Diagnostic Information and Procedures >> DTC P0182, P0183, P0187, P0188, P0191, P0192, P111F, P126E, P126F, P127C, P128A, P128B, P16E4, or P16E5 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0182, P0187 

Fuel Rail Temperature Sensor 1, 2 = Less than a predefined threshold - For greater than 6 s

P0183, P0188 

Fuel Rail Temperature Sensor 1, 2 = Greater than a predefined threshold - For greater than 6 s

P0191 

Fuel Rail Pressure Sensor 1, 2 = Skewed - For greater than 1 s

P0192 

Fuel Rail Pressure Sensor 1 = Less than a predefined threshold - For greater than 3 s

P111F 

The following parameters are not within 20°C (36°F) of each other:

The above condition(s) must occur for greater than 12 s.

P126E, P126F 

Fuel Rail Temperature Sensor 1, 2 = Internal Component Fault - For greater than 6 s

P127C 

Fuel Rail Pressure Sensor 2 = Less than a predefined threshold - For greater than 3 s

P128A, P128B 

Fuel Rail Pressure Sensor 1, 2 = Internal Component Fault - For greater than 3 s

P16E4, P16E5 

Serial data message from component: B47B Fuel Rail Pressure Sensor = Not Received - For greater than 3 s