Conditions for Running the DTC

P0089, P228C, P228D

• DTC P0016, P0017, P0018, P0019, P0090, P0091, P0092, P00C8, P00C9, P00CA, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0628, P1682 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• Engine = Not cranking
• Fuel Pressure Sensor = Greater than 180 kPa (26 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 12 s

P00C6

• DTC P0090, P0091, P0092, P00C8, P00C9, P00CA, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0628, P1682 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• ECT Sensor = -100 to 132°C (-148 to 270°F)
• Engine = Not Running
• Fuel Pressure Sensor = Greater than 0 kPa (0 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 8 V

Frequency the DTC runs = Continuously - After the running conditions are met

P2C1E, P2C1F, P2C20

• DTC P0016, P0017, P0018, P0019, P0090, P0091, P0092, P00C8, P00C9, P00CA, P0111, P0112, P0113, P0116, P0117, P0118, P0128, P0192, P0193, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P0627, P0628, P0629, P111E, P127C, P128A, P128B, P128F, P1682, P16E4, P16E5 = Not set
• BARO = Greater than 70 kPa (10.2 PSI)
• Engine = Not cranking
• Fuel Pressure Sensor = Greater than 180 kPa (26 PSI)
• IAT Sensor 1 = Warmer than -20°C (-4°F)
• Ignition Voltage = Greater than 11 V