Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0030, P0036, P0050, P0056
Control Circuit = Open - For greater than 7 s
P0031, P0037, P0051, P0057
Control Circuit = Short to Ground - For greater than 7 s
P0032, P0038, P0052, P0058
Control Circuit = Short to Voltage - For greater than 7 s
P0053, P0054
HO2S Heater Resistance 8 to 15 ohmsPer cold start-up
P0059, P0060
HO2S Heater Resistance 3.5 to 8.5 ohmsPer cold start-up
P0135, P0141
HO2S Heater Current 0.3 to 2.5 A - For greater than 10 s
P0155, P0161
HO2S Heater Current 0.3 to 3.1 A - For greater than 5 s
P103B, P103C
HO2S Heater Supply Voltage Within 2 V of the battery voltage - For greater than 3 s