Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0068
- Engine Speed = Greater than 800 RPM
- Ignition Voltage = Greater than 6.4 V
Frequency the DTC runs = Continuously - After the running conditions are met
P0101, P0106, P0121, P0236, P1101
- DTC P0102, P0103, P0107, P0108, P0111-P0114, P0116-P0119, P0128, P0237, P0238, P0335, P0336, P2227-P2230, P00C7, P00EA-P00EC, P00E9, P010C, P010D, P10BC, P111E, P14B6, P14BD, P16F3, P222C, P222D, P222E, P314D, U060F, U0610, U1319, U131A, U1346, U1349, U2011 = Not set
- DTC P0112, P0113, P0117, P0118, P0405, P0406, P00EA, P00EB, P042E, P14B6 = Not pending
- ECT Sensor = -9 to 130°C (16 to 266°F)
- Engine Speed = 400 to 6, 100 RPM
- IAT Sensor 1 = -20 to 125°C (-4 to 257°F)
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s