Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0030, P0031, P0032, P0036, P0037, P0038
Control Circuit = Commanded state does not match the actual state - For greater than 5 s
P0054
HO2S Heater Resistance = Resistance Out Of Range - During engine startup
P0135, P0141
HO2S 1, 2 Heater 0.3 to 2.5 A - For greater than 10 s
P103B
HO2S Heater Supply Voltage & Ignition Voltage = Not within 2 V of each other - For greater than 3 s
P103C
HO2S Heater Supply Voltage = Less than 6 V - For greater than 3 s