Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the automatic transmission range selector lever. Automatic Transmission Range Selector Lever Replacement
- Remove the control valve body. Control Valve Body Replacement
Remove and DISCARD the manual shift detent lever hub pin (3).
- Remove and DISCARD the manual shift shaft pin (1).
- Lower the transmission enough to remove the manual shift shaft and the manual shift shaft seal. Transmission Replacement (M5T with LTG)
- Remove the manual shift shaft (2).
Remove and DISCARD the manual shift shaft seal (1) using DT-45201 cooler line seal remover.