Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Apply the parking brake.
- Shift the transmission into neutral.
{If equipped} Transmission Heat Shield (2) - Remove. - Transmission Heat Shield Replacement
Slide the automatic transmission range selector lever cable locking ring (1) forward to allow access to the automatic transmission range selector lever cable retainer (2).
- Using a flat bladed tool, release the automatic transmission range selector lever cable retainer (2).
- Remove the automatic transmission range selector lever cable (3) from automatic transmission range selector lever (5).
- Remove the automatic transmission range selector lever cable lever nut (4).
- Remove the automatic transmission range selector lever (5).