LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Automatic Transmission - 10L60, 10L80 Or 10L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Vent Hose Clip Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the plenum front panel. Plenum Front Panel Replacement (LTG LGX) , or Plenum Front Panel Replacement (LT1 LT4)
  2. GM4537758Courtesy of GENERAL MOTORS COMPANY

    Disconnect the transmission vent hose assembly (1) from the transmission vent hose clip bracket (3).

  3. Remove the transmission vent hose clip bracket retaining nut (2).
  4. Remove the transmission vent hose clip bracket (3) from the vehicle.