Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
The fluid pan gasket is reusable. Inspect the gasket to determine if it may be reused. If the gasket is stuck to the case or pan, it should be replaced.

Install the automatic transmission fluid pan gasket (3) to the fluid pan.
Install the automatic transmission fluid pan (2) to the transmission.
Fig 1: Identifying Automatic Transmission Fluid Pan Bolts With Tightening Sequence
Courtesy of GENERAL MOTORS COMPANY

Install the automatic transmission fluid pan bolts (1) and tighten in the sequence shown to 10 N.m (89 lb in).
Fill the transmission. Transmission Fluid Level and Condition Check
Lower the vehicle.