LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Automatic Transmission - 10L60, 10L80 Or 10L90 - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Lever Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Apply the parking brake.
  2. Shift the transmission into neutral.
  3. Raise the vehicle. Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible)
  4. GM6014245Courtesy of GENERAL MOTORS COMPANY

    Slide the automatic transmission range selector lever cable locking ring (1) forward to allow access to the automatic transmission range selector lever cable retainer (2).

  5. Using a flat bladed tool, release the automatic transmission range selector lever cable retainer (2).
  6. Remove the automatic transmission range selector lever cable (3) from automatic transmission range selector lever cable lever (5).
  7. Remove the automatic transmission range selector lever cable lever nut (4).
  8. Remove the automatic transmission range selector lever cable lever (5).
scientia non olet · About LEMON Manuals