Automatic Transmission Range Selector Lever Cable Bracket Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible) . Automatic Transmission Range Selector Lever Cable Replacement .
1	Transmission Range Selector Cable Bracket Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Transmission Range Selector Cable Bracket

Callout

Component Name

Preliminary Procedures

Transmission Range Selector Cable Bracket Bolt [2x]

CAUTION:

Tighten
22 N.m (16 lb ft)

Transmission Range Selector Cable Bracket