LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Oil Pump Sprocket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Oil Pan - Remove - Oil Pan Replacement 
  2. GM4622558Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Engine front cover not shown for clarity.

    Using a suitable wrench to hold the oil pump sprocket (2), remove and DISCARD the oil pump drive bolt (1).

  3. Remove the oil pump sprocket (2) from the oil pump drive shaft leaving the oil pump timing chain (4) on the crankshaft sprocket.
  4. Clean and inspect all of the oil pump drive components.
scientia non olet · About LEMON Manuals