LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Oil Pump Overhaul >> Oil Pump Assemble

Oil Pump Assemble

WARNING: This page is about a different variant/trim than selected.
  1. GM3960266Courtesy of GENERAL MOTORS COMPANY

    Vacuum Pump Seal (1) - Install NEW

    2. NOTE:

    This is press fit and not serviceable.

  2. Dowel Pin (2) - Install
  3. Oil Pump Housing Passage Outer Seal (3) - Install NEW
  4. Oil Pump Housing Passage Outer Seal (4) - Install NEW
  5. Oil Pump Sprocket (5) - Install
    6. CAUTION:

    Refer to Fastener Caution .

  6. Oil Pump Drive Bolt (4) - Install NEW and tighten
    1. First Pass : 15 N.m (11 lb ft)
    2. Final Pass: 110 degrees
  7. Oil Pump Suction Pipe Gasket (7) - Install NEW
  8. Oil Pump Suction Pipe (8) - Install
  9. Oil Pump Suction Pipe Bolt (3) - Install and tighten 10 N.m (89 lb in)
  10. Oil Pump Flow Control Valve (10) - Install
  11. Oil Pump Flow Control Valve Boltwith Insulator (3) - Install and tighten 5 N.m (44 lb in)
scientia non olet · About LEMON Manuals