Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Drain the cooling system. Cooling System Draining and Filling (GE 47716)Cooling System Draining and Filling (Static Fill)
- Drain the engine oil. Engine Oil and Oil Filter Replacement
- Oil Level Indicator Tube - Remove - Oil Level Indicator Tube Replacement
- Drivetrain and Front Suspension Cradle - Remove - Drivetrain and Front Suspension Cradle Replacement (LGX - Coupe)Drivetrain and Front Suspension Cradle Replacement (LGX - Convertible)
Electrical Connector (1) @Engine Oil Level Indicator Switch - Disconnect
- Engine Oil Cooler Outlet Pipe - Remove - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Oil Cooler Inlet Pipe - Remove - Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet)
- Engine Mount Bracket - Remove [2x]
- Remove the transmission fluid cooler pipe clip bolts at the oil pan. Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M13, With 1LE Package)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M5T, With V03)Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LGX With M5T, Without V03)
- Catalytic Converter Brace Bracket - Remove - Catalytic Converter Brace Bracket Replacement (LGX)
Remove the lower transmission to engine bolts. (1)
Oil Pan Bolt (1-4) - Remove [17x]
- Oil Pan (5) - Remove
- Clean, inspect, and overhaul the oil pan as needed. Oil Pan Overhaul