Installation Procedure
WARNING: This page is about a different variant/trim than selected.
-
Fig 1: Exploded View Of Lower Oil Pan, Drain Plug And Oil Filter Components (With Bolt Tightening Sequence)
Courtesy of GENERAL MOTORS COMPANY
NOTE:Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant
Apply sealant (1) to the NEW lower oil pan. Adhesives, Fluids, Lubricants, and Sealers
- Lower Oil Pan (2) - Install
- Lower Oil Pan Bolt (3) - Install and tighten in sequence [11x] 10 N.m (89 lb in)
- Fill the engine oil to the proper level with NEW engine oil.
- Start the engine and inspect for leaks.
CAUTION:
Refer to Fastener Caution .