Engine Oil Pressure Sensor and/or Switch Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Engine Oil Cooler Pipe Replacement (LGX, Inlet)Engine Oil Cooler Pipe Replacement (LGX, Outlet) Air Cleaner Assembly Replacement Remove the air conditioning evaporator hose clip nut and reposition the evaporative hose. Air Conditioning Evaporator Hose Replacement (LGX without V18)Air Conditioning Evaporator Hose Replacement (LGX with V18)
1	Oil Pressure Sensor Electrical Connector
2	Engine Oil Pressure Sensor and/or Switch CAUTION: Refer to Component Fastener Tightening Caution . Tighten 20 N.m (15 lb ft) Special Tools EN-41712 Oil Pressure Switch Socket Equivalent regional tools: Special Tools .

Callout

Component Name

Preliminary Procedures

Oil Pressure Sensor Electrical Connector

Engine Oil Pressure Sensor and/or Switch

CAUTION:

Tighten
20 N.m (15 lb ft)
Special Tools
EN-41712 Oil Pressure Switch Socket
Equivalent regional tools: Special Tools .