LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Engine Block Overhaul >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
    NOTE:

    Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant

  1. Remove any old thread sealant, gasket material or sealant using EN - 28410  Gasket Remover.
  2. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  3. Clean all threaded and through holes with solvent.
  4. WARNING:

    Refer to Safety Glasses Warning .

  5. Dry the engine block with compressed air.