LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Crankshaft Rear Oil Seal and Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Automatic Transmission Flex Plate - Remove - Automatic Transmission Flex Plate Replacement 
  2. Oil Pan - Remove - Oil Pan Replacement 
  3. GM5154991Courtesy of GENERAL MOTORS COMPANY

    Remove the crankshaft rear oil seal housing bolts. (1) [7x]

  4. Remove and DISCARD the crankshaft rear oil seal housing. (2)
  5. Clean and inspect the engine block mounting surface.
scientia non olet · About LEMON Manuals