LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM2716895Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not lubricate the crankshaft front oil seal or the crankshaft balancer sealing surfaces.

    Use the EN-29184  installer (1) or equivalent to install the crankshaft front oil seal (2).

  2. Crankshaft Balancer Replacement  - Install