Removal Procedure
WARNING: This page is about a different variant/trim than selected.
Camshaft Position Actuator (1) - Remove [2x] - Camshaft Position Actuator Replacement - Bank 2
Dowel Pin (4) - Remove
- Camshaft Bearing Cap Bolt (5) - Remove [12x]
- Camshaft Bearing Cap (6) - Remove
- Camshaft Bearing Cap (7) - Remove
- Intake Camshaft - Left Side (8) - Remove
- Exhaust Camshaft - Left Side (9) - Remove
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 2 (C)
NOTE:
Laser Etched or ID flats- Correct Camshaft Location - Bank 2 (D)