LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L - Repair Instructions) >> Repair Instructions >> Camshaft Cover Overhaul >> Disassemble Procedure

Disassemble Procedure

WARNING: This page is about a different variant/trim than selected.

Camshaft Cover - Left Side

  1. GM3961521Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    These components have tamper-proof connections and cannot be disassembled.

    Positive Crankcase Ventilation Valve (1) - Remove

  2. Camshaft Position Sensor Bolt (2) - Remove [2x]
  3. Camshaft Position Sensor (3) - Remove [2x]
  4. Valve Rocker Arm Oil Control Valve Bolt (4) - Remove
  5. Valve Rocker Arm Oil Control Valve (5) - Remove
  6. Spark Plug Shield Seal (6) - Remove and DISCARD [3x]

Camshaft Cover - Right Side

  1. GM3961523Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    These components have tamper-proof connections and cannot be disassembled.

    Positive Crankcase Ventilation Valve (1) - Remove

  2. Camshaft Position Sensor Bolt (2) - Remove [2x]
  3. Camshaft Position Sensor (3) - Remove [2x]
  4. Valve Rocker Arm Oil Control Valve Bolt (4) - Remove
  5. Valve Rocker Arm Oil Control Valve (5) - Remove
  6. Spark Plug Shield Seal (6) - Remove and DISCARD [3x]
scientia non olet · About LEMON Manuals