Removal Procedure
- Intake Manifold Cover - Remove - Intake Manifold Cover Replacement
Positive Crankcase Ventilation Tube Bolt (1) - Remove
- CAUTION:
The Positive Crankcase Ventilation (PCV) line is tamper resistant and must always be replaced once it is removed. The fittings connected to the PCV line must also be replaced if they are damaged when the PCV line is removed. To reduce the risk of damage to the fittings, use a suitable cutting tool and carefully cut the connections away.
NOTE:Disconnecting the tamper resistant connections will damage the positive crankcase ventilation tube, it must be replaced after removal.
Use a suitable tool, disconnect the locking tabs at each temper resistant connection.
- Positive Crankcase Ventilation Tube (1) - Remove and DISCARD
Use a suitable tool, disconnect the locking tabs at each temper resistant connection.
- Positive Crankcase Ventilation Tube (1) - Remove and DISCARD
The Positive Crankcase Ventilation (PCV) line is tamper resistant and must always be replaced once it is removed. The fittings connected to the PCV line must also be replaced if they are damaged when the PCV line is removed. To reduce the risk of damage to the fittings, use a suitable cutting tool and carefully cut the connections away.
Disconnecting the tamper resistant connections will damage the positive crankcase ventilation tube, it must be replaced after removal.