Exhaust Camshaft and Components Removal

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Loosen each bolt on each cap one turn at a time until there is no spring tension pushing on the camshaft.

Mark camshaft caps (2) to ensure they are installed in the same position.
Remove the exhaust camshaft cap bolts (3).
Remove the camshaft caps (2) ensuring they are marked and refitted in same position on assembly.
Remove the exhaust camshaft (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Keep all of the roller finger followers and hydraulic lash adjusters in order so that they can be reinstalled in their respective locations.

Remove the exhaust camshaft roller finger followers (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the hydraulic lash adjusters (1).
Courtesy of GENERAL MOTORS COMPANY

Remove the camshaft bearing lower front cap (1).