Engine Mount Vacuum Tank Replacement
WARNING: This page is about a different variant/trim than selected.
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Front Compartment Lower Noise Shield Replacement (Coupe - LGX, LTG) |
|
| 1 | Engine Mount Vacuum Tank Fastener
CAUTION:
Refer to Fastener Caution .
NOTE:
Disconnect the vacuum lines from the components. Tighten 9 N.m (80 lb in) |
| 2 | Engine Mount Vacuum Tank |