Drive Belt Replacement
WARNING: This page is about a different variant/trim than selected.
Courtesy of GENERAL MOTORS COMPANY
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout |
Component Name |
|
Preliminary Procedure
- If equipped with engine RPO code LCV, remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Non-Tamperproof)
, or Air Cleaner Outlet Duct Replacement (Tamperproof)
.
|
| 1 |
Drive Belt Procedure
- Use the proper tool to rotate the drive belt tensioner.
- Remove the drive belt from the pulleys and tensioner.
|
| 2 |
Drive Belt Tensioner Procedure
- Clean and inspect the drive belt surfaces of all the pulleys.
- Inspect the drive belt for correct alignment.
|