LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 2.0L - Repair Instructions) >> Repair Instructions >> Crankshaft and Bearing Removal >> Crankshaft End Play Measurement

Crankshaft End Play Measurement

WARNING: This page is about a different variant/trim than selected.
  1. Place a dial indicator at the crankshaft nose.
  2. Gently force the crankshaft to the extreme front and rear positions with a pry tool while monitoring the movement of the dial indicator.
  3. The crankshaft end play should not exceed specifications. Refer to Engine Mechanical Specifications .
  4. If the specifications are exceeded inspect the thrust bearing and the crankshaft thrust wall for wear. Refer to Engine Mechanical Specifications .
  5. Replace the thrust bearing or crankshaft as necessary.
scientia non olet · About LEMON Manuals