Crankshaft Front Oil Seal Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
1	Front Crankshaft Seal Procedure Use a suitable tool to remove the front cover oil seal. Use the EN 50820 Front Crankshaft Seal Installer to install the seal. Special Tools EN 50820 Front Crankshaft Seal Installer For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedure
Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .

Front Crankshaft Seal

Procedure

Special Tools
EN 50820 Front Crankshaft Seal Installer
For equivalent regional tools, refer to Special Tools .