LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 2.0L - Repair Instructions) >> Repair Instructions >> Balancer Shaft with Oil Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Oil Pan Replacement  - Remove
  2. Timing Chain Crankshaft Sprocket Replacement  - Remove
  3. GM4176256Courtesy of GENERAL MOTORS COMPANY

    Balancer Shaft with Oil Pump Bolt (1) - Remove [8x]

  4. Balancer Shaft with Oil Pump (2) - Remove
    5. NOTE:

    If replacing the oil pump, remove it from the balancer shaft.

  5. Remove the oil pump. Balancer Shaft with Oil Pump Disassemble 
scientia non olet · About LEMON Manuals