Special Tools
WARNING: This page is about a different variant/trim than selected.
- EN-51760
Flywheel Holding Tool
- EN-45059
Angle Meter
For equivalent regional tools, refer to Special Tools
.
 Courtesy of GENERAL MOTORS COMPANY
|
To prevent crankshaft rotation, install EN-51760
holding tool (2) and starter motor bolts (1) at the starter motor location and engaging the flywheel.
 Courtesy of GENERAL MOTORS COMPANY
|
Remove and discard the flywheel attaching bolts (1).
- Remove the flywheel (2).
- Remove EN 51760
holding tool.