Fuel Feed Pipe Replacement (LGX at Engine)

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Fuel Pressure Relief Intake Manifold Replacement Engine Rear Noise Shield Replacement
1	Fuel Feed Pipe Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Quick Connect Fitting[2x] Procedure Metal Collar Quick Connect Fitting Service
3	Fuel Feed Pipe Procedure Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly. Pressurize the fuel system and check for leaks.