Installation Procedure
WARNING: This page is about a different variant/trim than selected.
Reposition PVC tube.
- Positive Crankcase Ventilation Tube Bolt(1) - Install - Positive Crankcase Ventilation Hose/Pipe/Tube Replacement
- NOTE:
Ensure the outlet duct is fully seated to the mating surfaces before clamping. Verify that the cuff is not rolled under.
Air Cleaner Outlet Duct(3) - Install
- Air Cleaner Outlet Duct Clamp(2) - Install and tighten [2x] 4 N.m (35 lb in)
- Positive Crankcase Ventilation Tube(1)@Air Cleaner Outlet Duct(3) - Connect
- Intake Manifold Cover - Install - Intake Manifold Cover Replacement
CAUTION:
Refer to Fastener Caution .