Front Body Exhaust Heat Shield Replacement (Left)
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Lifting and Jacking the Vehicle (ZL1) , or Lifting and Jacking the Vehicle (Convertible) |
|
| 1 | Front Body Exhaust Heat Shield Bolt [5x]
CAUTION:
Refer to Fastener Caution . Tighten 9 N.m (80 lb in) |
| 2 | Front Body Exhaust Heat Shield Retainer [2x] Tighten 1.75 N.m (15 lb in) |
| 3 | Front Body Exhaust Heat Shield - Left Side |