Instrument Panel Cluster Trim Plate Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Instrument Panel Center Trim Pad Replacement
1	Instrument Panel Cluster Trim Plate Bolt [5x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Instrument Panel Cluster Trim Plate Procedure Use a flat bladed plastic trim tool. Connect the electrical connectors. Transfer components as necessary.

Callout

Component Name

Instrument Panel Cluster Trim Plate Bolt [5x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Instrument Panel Cluster Trim Plate

Procedure