Front Floor Console Rear Trim Panel Replacement (Endcap)

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Front Floor Console Replacement
1	Front Floor Console Trim Plate Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Floor Console Rear Trim Panel Procedure Use a flat bladed plastic trim tool. Disconnect electrical connections, if applicable. Transfer components as necessary.

Callout

Component Name

Front Floor Console Trim Plate Bolt [2x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Front Floor Console Rear Trim Panel

Procedure