LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2023 >> Camaro ZL1, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Quarter Lower Rear Trim Panel Replacement (Convertible)

Quarter Lower Rear Trim Panel Replacement (Convertible)

GM4328807Courtesy of GENERAL MOTORS COMPANY
NOTE: Callouts items in the following chart represent components shown in graphic above.
Callout Component Name

Preliminary Procedures

  1. Front Side Door Sill Garnish Molding Replacement 
  2. Quarter Upper Trim Panel Replacement 
  3. Rear Seat Back Pad Replacement (Convertible) , or Rear Seat Back Pad Replacement (ZL1 1LE)
  4. Remove the driver or passenger seat retractor side belt anchor fastener. Front Seat Belt Retractor Replacement (Convertible)
1 Quarter Lower Rear Trim Panel

Procedure

  1. Grasp the panel and pull outward, disengaging the clips securing the panel to the vehicle.
  2. Feed the seat belts through bezel opening in the panel.
  3. Disconnect the electrical connector.