Front End Sheet Metal Diagonal Brace Replacement - Right Side
NOTE:
Callouts in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Plenum Front Panel Replacement (LTG LGX) , or Plenum Front Panel Replacement (LT1 LT4) |
|
| 1 | Front End Sheet Metal Diagonal Brace Bolt [2x]
CAUTION:
Refer to Fastener Caution . Tighten 22 N.m (16 lb ft) |
| 2 | Plenum Panel Bolt Tighten 9 N.m (80 lb in) |
| 3 | Front End Sheet Metal Diagonal Brace Nut Tighten 22 N.m (16 lb ft) |
| 4 | Front End Sheet Metal Diagonal Brace |