Rear Bumper Fascia Energy Absorber Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Rear Bumper Fascia Replacement (Base, Uplevel) , or Rear Bumper Fascia Replacement (ZL1) Reposition electrical connectors for the rear object alarm sensors.
1	Rear Bumper Fascia Energy Absorber Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Rear Bumper Fascia Energy Absorber Clip [4x]
3	Rear Bumper Fascia Energy Absorber