Windshield Wiper Transmission Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Air Inlet Grille Panel Replacement
1	Windshield Wiper Transmission Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 8 N.m (71 lb in)
2	Windshield Wiper Transmission Procedure Slide the windshield wiper transmission inboard to release the grommet from the plenum. Disconnect the electrical connector. Remove the windshield wiper transmission from the vehicle. Transfer components as necessary.

Callout

Component Name

Windshield Wiper Transmission Bolt [2x]

CAUTION:

Tighten
8 N.m (71 lb in)

Windshield Wiper Transmission

Procedure

Slide the windshield wiper transmission inboard to release the grommet from the plenum.
Disconnect the electrical connector.
Remove the windshield wiper transmission from the vehicle.
Transfer components as necessary.