Air Inlet Grille Panel Extension Replacement
 Courtesy of GENERAL MOTORS COMPANY
|
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout |
Component Name |
| 1 |
Air Inlet Grille Panel Retainer |
| 2 |
Air Inlet Grille Panel Extension Procedure
- Apply two layers of masking tape around the top edge of the service part to prevent paint damage.
- Using a suitable flat bladed plastic tool, release the air inlet grille panel extension from the air inlet grille panel extension grommets.
- Using a 50/50 mixture of isopropyl alcohol and clean drinkable water and a clean towel, remove the left over adhesive residue from the masking tape.
|