Headlamp Automatic Control Module Replacement
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (ZL1) |
|
| 1 | Headlamp Automatic Control Module Bolt [4x]
CAUTION:
Refer to Fastener Caution . Tighten 1.5 N.m (13 lb in) |
| 2 | Headlamp Automatic Control Module Procedure Pull the headlamp automatic control module straight out and disconnect the electrical connectors. |