Front Headlamp Replacement (LED, Uplevel)

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Replacement (Base, Uplevel) Front Bumper Fascia Center Support Replacement Disconnect the electrical connectors.
1	Headlamp Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp Procedure Transfer components as necessary. After installation, aim the front headlamps. Front Headlamp Aiming

Callout

Component Name

Preliminary Procedures

Headlamp Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Headlamp

Procedure