Front Headlamp Replacement (LED, Base)

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts items in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Replacement (Base, Uplevel) Disconnect the electrical connectors.
1	Headlamp Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp Procedure Transfer components as necessary. After installation, aim the front headlamps. Front Headlamp Aiming

Callout

Component Name

Preliminary Procedures

Headlamp Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Headlamp

Procedure