Radio Control Assembly Replacement (IOS, IOT)

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedure Instrument Panel Accessory Center Trim Plate Replacement (With IOS, IOT)
1	Radio Control Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Radio Control Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set up procedures, if required. Transfer components as necessary.

Callout

Component Name

Radio Control Bolt [2x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Radio Control

Procedure

Disconnect the electrical connectors.
Refer to Control Module References for programming and set up procedures, if required.
Transfer components as necessary.