Heater and Air Conditioning User Interface Control Replacement

Courtesy of GENERAL MOTORS COMPANY

NOTE: Callouts in the following chart represent components shown in graphic above.

Callout	Component Name
Preliminary Procedures Instrument Panel Accessory Center Trim Plate Replacement Disconnect the electrical connector.
1	Heater and Air Conditioning User Interface Control Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Heater and Air Conditioning User Interface Control

Callout

Component Name

Preliminary Procedures

Heater and Air Conditioning User Interface Control Bolt [2x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Heater and Air Conditioning User Interface Control